6EP1 334-2BA01 | 6EP1334-2BA01 | 6EP13342BA01 | 6EP-1334-2BA01 

↖Product Data at manufacturer’s Website ↗ Click↘ HERE↙

↖Download↗ data sheet -Click↘ HERE↙

SIEMENS 

SITOP Smart 10A 

6EP1 334-2BA01 power supply

input: AC 230V/120V ....2A/4.1A

Output : DC 24V/10A

max op temp : 60Degree C

made in Austria

Artikelnummer = 6EP1334-2BA01
SITOP SMART 24 V/10 A, WITH PFC
SITOP SMART 240 W STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V DC / 10 A PFC VERSION
Input
Input = 1-phase AC
Supply voltage 
● 1 at AC Rated value = 120 V
● 2 at AC Rated value = 230 V
● Note = Set by means of selector switch on the device
Input voltage 
● 1 at AC = 85 ... 132 V
● 2 at AC = 170 ... 264 V
Wide-range input = No
Overvoltage resistance = 2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min. = 20 ms; at Vin = 93/187 V
Rated line frequency 1 = 50 Hz
Rated line frequency 2 = 60 Hz
Rated line range = 47 ... 63 Hz
Input current = 
● at rated input voltage 120 V = 4.1 A
● at rated input voltage 230 V = 2 A
Switch-on current limiting (+25 °C), max. = 65 A
Duration of inrush current limiting at 25 °C = 
● typical = 3 ms
I²t, max. = 3.3 A²·s
Built-in incoming fuse = T 6.3 A/250 V (not accessible)
Protection in the mains power input (IEC 898) = Recommended miniature circuit breaker: from 10 A characteristic C
Output
Output = Controlled, isolated DC voltage
Rated voltage Vout DC = 24 V
Total tolerance, static ± = 3 %
Static mains compensation, approx. = 0.1 %
Static load balancing, approx. = 0.5 %
Residual ripple peak-peak, max. = 150 mV
Residual ripple peak-peak, typ. = 50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) = 240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) = 150 mV
Adjustment range = 22.8 ... 28 V
Product function Output voltage adjustable = Yes
Output voltage setting = via potentiometer
Status display = Green LED for 24 V OK
On/off behavior = Overshoot of Vout approx. 4 %
Startup delay, max. = 0.1 s
Voltage rise, typ. = 50 ms
Rated current value Iout rated = 10 A
Current range = 0 ... 12 A
● Note = 12 A up to +45 °C
Supplied active power typical = 288 W
Short-term overload current = 
● on short-circuiting during the start-up typical = 30 A
● at short-circuit during operation typical = 33 A
Duration of overloading capability for excess current = 
● on short-circuiting during the start-up = 100 ms
● at short-circuit during operation = 200 ms
Parallel switching for enhanced performance = Yes
Numbers of parallel switchable units for enhanced performance = 2
Efficiency
Efficiency at Vout rated, Iout rated, approx. = 91 %
Power loss at Vout rated, Iout rated, approx. = 24 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. = 0.3 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. = 1 %
Load step setting time 50 to 100%, typ. = 0.2 ms
Load step setting time 100 to 50%, typ. = 0.2 ms
Protection and monitoring
Output overvoltage protection = < 33 V
Current limitation = 12.5 ... 13.5 A
Property of the output Short-circuit proof = Yes
Short-circuit protection = Constant current characteristic
Enduring short circuit current RMS value = 
● typical = 16 A
Overload/short-circuit indicator = -
Safety
Primary/secondary isolation = Yes
Galvanic isolation = Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class = Class I
Leakage current = 
● maximum = 3.5 mA
● typical = 0.8 mA
CE mark = Yes
UL/cUL (CSA) approval = cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259, cCSAus (CSA C22.2 No. 60950-1, UL 60950-1, UL 1604)
Explosion protection = ATEX (EX) II 3G Ex nA II T4; UL 1604 Class I, Div. 2, Group ABCD
FM approval = -
CB approval = Yes
Marine approval = GL, ABS
Degree of protection (EN 60529) = IP20
EMC
Emitted interference = EN 55022 Class B
Supply harmonics limitation = EN 61000-3-2
Noise immunity = EN 61000-6-2
Operating data
Ambient temperature = 
● during operation = 0 ... 60 °C
— Note = with natural convection
● during transport = -40 ... +85 °C
● during storage = -40 ... +85 °C
Humidity class according to EN 60721 = Climate class 3K3, no condensation
Mechanics
Connection technology = screw-type terminals
Connections = 
● Supply input = L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded
● Output = L+, M: 2 screw terminals each for 0.5 ... 2.5 mm²
● Auxiliary = -
Width of the enclosure = 70 mm
Height of the enclosure = 125 mm
Depth of the enclosure = 125 mm
Required spacing = 
● top = 50 mm
● bottom = 50 mm
● left = 0 mm
● right = 0 mm
Weight, approx. = 0.8 kg
Product feature of the enclosure housing for side-by-side mounting = Yes
Installation = Snaps onto DIN rail EN 60715 35x7.5/15
MTBF at 40 °C = 1 443 606 h
Other information = Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)